|
|
Post by Executioner on Oct 31, 2004 4:39:13 GMT -5
Hi All !
I'm a new user of CPC Emulators, I tried a lot of them, but in this forum I read that WinAPE is good! So I downloaded this.
But I have a problem. I can't switch to BASIC mode.
When I start, a game is executing (by the way, I can't even play the game). I tried to solve this by using help but I couldn't do anything
Can anyone help me please?? How can I work on BASIC in WinAPE? (I have the WinAPE20A6)
thnx
|
|
Satchman2000 as Guest
Guest
|
Post by Satchman2000 as Guest on Nov 1, 2004 7:39:00 GMT -5
As soon as the emulator starts, i gives a menu-
f1 for BASIC
f2 for Burnin' Rubber
if you press F1 on your numeric kepad, all will be well and you will be able to use BASIC.
From memory the keys for Burnin Rubber are the PC cursor keys with right ctrl for change gear- up accellerates.
this could very well be wrong, tho...
good luck!
|
|
Tony
Full Member
Posts: 29
|
Post by Tony on Nov 1, 2004 11:58:13 GMT -5
Hi, as said above press 1 on your numeric keypad to use BASIC. If that doesn't work try pressing Num-Lock once (It must be ON for 1 and 2 on your numeric keypad to work). As for Burnin' Rubber, you have two options: 1. Choose some CPC keys. "G" works as Fire 1 and "F" works as Fire 2, in Burnin' Rubber. So if you use no joystick (emulated or real) press F and then G to set your keys. The important controls are Accelerate, Brake, Left and Right. 2. Using an emulated or real joystick. A real joystick should work automatically. Emulated joysticks: The default keys for a joystick in WinAPE32 are Arrows on the numeric keypad, 5 on the numeric keypad for Fire1 and Del on the numeric keypad for Fire 2. For these keys to work Num-Lock must be OFFSee my posts on this thread to find out more about emulated joysticks in WinAPE32, like choosing your own keys as the emulated joystick: amstrad.proboards7.com/index.cgi?board=general&action=display&n=1&thread=163Have fun! |
|
|
|
Post by Executioner on Nov 1, 2004 18:02:25 GMT -5
Thank you very much.. I tried to push the function key F1 and I always saw the help menu...  Now it's ok Thank you |
|
|
|
Post by Tidus4Yuna on Dec 7, 2004 0:18:33 GMT -5
They meant for you to press the Num Keypad #1, which is F1 for Basic
|
|
|
|
Post by Operater on Feb 3, 2005 19:37:08 GMT -5
hmm.. I'm new in here, can anyone help me find a Game that has been called ( the game was started with a command run"barbari ). It's not barbarian, it's a game with one character, adventures type, with some ghost around and weapons to search & use, ... please give me something  |
|
Tony
Full Member
Posts: 29
|
Post by Tony on Feb 4, 2005 17:52:50 GMT -5
If not the sequel to Barbarian from Palace Software (imaginatively called Barbarian 2: ftp.nvg.ntnu.no/pub/cpc/games/arcade/barbari2.zip), that should be World Of Barbarian, a totally different game by Melbourne House (ftp://ftp.nvg.ntnu.no/pub/cpc/games/adventur/graphic/wobarbar.zip) |
|
